B261E
B261E VEHICLE TYPE
Description
There are two types of vehicle.
- HEV
- Conventional
DTC Logic
DTC DETECTION LOGIC
NOTE:
- If DTC B261E is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
Security System.
- If DTC B261E is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
Security System.
DTC CONFIRMATION PROCEDURE
1. PERFORM DTC CONFIRMATION PROCEDURE
1.Turn ignition switch ON.
2.Check "Self diagnostic result" with CONSULT.
Is DTC detected?
YES- Go to .
NO- INSPECTION END
Diagnosis Procedure
1. INSPECTION START
1.Turn ignition switch ON.
2.Check "Self diagnostic result" with CONSULT.
3.Touch "ERASE".
4.Perform DTC Confirmation Procedure.
See .
Is the 1st trip DTC B261E displayed again?
YES- Replace BCM. Removal And Installation.
NO- INSPECTION END