Special Repair Requirement

INSPECTION AND ADJUSTMENT

SYSTEM INITIALIZATION : Special Repair Requirement


INITIALIZATION PROCEDURE


1. CHOOSE METHOD

There are two initialization methods.
Which method do you use?
With door switch-GO TO 2.
With vehicle speed-GO TO 4.

2. STEP A-1

Turn ignition switch from ACC to OFF position.
- GO TO 3.

3. STEP A-2

Driver door switch is ON (open) --> OFF (close) --> ON (open).
- END

4. STEP B-1

Drive the vehicle at more than 25 km/h (16 MPH).
- END