Parking Brake Switch

PARKING BRAKE SWITCH

Component Function Check


1. CHECK PARKING BRAKE SWITCH OPERATION

Operate the parking brake pedal. Then check that the brake warning lamp in the combination meter turns ON/
OFF correctly.





Is the inspection result normal?
YES- INSPECTION END
NO- Proceed to diagnosis procedure. .


Diagnosis Procedure


1. CHECK PARKING BRAKE SWITCH

Check parking brake switch. .
Is the inspection result normal?
YES- GO TO 2.
NO- Replace parking brake switch.

2. CHECK COMBINATION METER

Check if the indication and operation of combination meter are normal. Reading and Clearing Diagnostic Trouble Codes.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace combination meter.

3. CHECK DATA MONITOR

Select "ABS", "DATA MONITOR" and "PARK BRAKE SW" in order with CONSULT, and perform the parking brake switch inspection.





Is the inspection result normal?
YES- INSPECTION END
NO- Check unified meter and A/C amp. CONSULT Function.


Component Inspection


1. CHECK PARKING BRAKE SWITCH

1.Turn the ignition switch OFF.
2.Disconnect parking brake switch connector.
3.Check the continuity between parking brake switch connector and ground.





Is the inspection result normal?
YES- INSPECTION END
NO- Replace parking brake switch.