System Description

ACCS (ADVANCE CLIMATE CONTROL SYSTEM)

System Description

- ACCS (advanced climate control system) controls passenger room air. It maintains the cleanliness of the passenger room air using an in-cabin microfilter and a combination of each of the following functions.
- Automatic intake control (exhaust gas / outside odor detecting mechanism)
- Plasmacluster(tm) control
NOTE:
- Plasmacluster(tm) ion technology developed by Sharp Corporation is installed in this item.
- Plasmacluster(tm) is a trademark of Sharp Corporation.
- Various operations of ACCS (advanced climate control system) are transmitted from preset switch to AV
control unit via communication line and from AV control unit to unified meter and A/C amp. via CAN communication. unified meter and A/C amp. sends each indication information to AV control unit via CAN communication. AV control unit displays each indication information that is received.

AUTOMATIC INTAKE CONTROL (EXHAUST GAS / OUTSIDE ODOR DETECTING MECHANISM)

Description
In addition to air inlet automatic control of automatic air conditioning system, unified meter and A/C amp. controls automatically air inlet according to signal from exhaust gas / outside odor detecting sensor, so that unpleasant outside odor does not enter in passenger room.
Operation Description
- When pressing auto intake switch while blower motor is operated and DEF switch is OFF, auto intake switch indicator lamp and intake switch indicator lamp turn ON. Air inlet is fixed to recirculation for approximately 5
minutes, and then is switched to automatic intake control (exhaust gas / outside odor detecting mechanism).
- Air inlet switches to recirculation when exhaust gas or outside odor is detected while automatic intake control (exhaust gas / outside odor detecting mechanism) is operated. After that, air inlet switches to fresh air intake when exhaust gas or outside odor becomes not detectable.
NOTE:
- Sensitivity of exhaust gas / outside odor detecting sensor can be changed. Adjustments.
- Automatic intake control (exhaust gas / outside odor detecting mechanism) does not operate when ambient temperature is 2�
C (28�F) or less. In this case, control is only for control of automatic air inlet of automatic air conditioning system.

PLASMACLUSTER(tm) CONTROL

Description
Plasmacluster(tm) control eliminates microbes and reduces odor on interior surface by including high density
Plasmacluster(tm) ion in air conditioning outlet air flow.
Operation Description
- Plasmacluster(tm) control operates by interlocking to blower motor. Plasmacluster(tm) control operates when blower motor operates.
- Control status is displayed on air conditioning system display screen.
- Plasmacluster(tm) system switches display according to air flow volume as shown in the following figure.





- When air flow is low.





- When air flow is high.