P Position Warning Does Not Operate

P POSITION WARNING DOES NOT OPERATE

Description

NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Work Flow.
- Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm the list above twice in order to ensure proper operation. Warning Function.
- Door lock function is normal.


Diagnosis Procedure


1. CHECK TRANSMISSION RANGE SWITCH

Check DTC for BCM.
A L L Diagnostic Trouble Codes ( DTC ).
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Intelligent Key Warning Buzzer.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Buzzer (Combination Meter).
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK DOOR SWITCH

Check door switch (driver side).
Door Switch.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK INSIDE KEY ANTENNA

Check inside key antenna.
B2621 (instrument center).
B2622 (console).
B2623 (luggage room).
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CHECK COMBINATION METER DISPLAY

Check combination meter display.
Combination Meter Display Function.
Is the inspection result normal?
YES- GO TO 7.
NO- Repair or replace the malfunctioning parts.

7. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.