Overhaul

REAR WHEEL HUB AND HOUSING

Inspection


INSPECTION AFTER REMOVAL

Wheel Hub and Bearing Assembly
Check the wheel hub and bearing assembly for wear, cracks, and damage. Replace if necessary.
Axle Housing
Check the axle housing for wear, cracks, and damage. Replace if necessary.
Ball Joint Inspection
Check for boot breakage, axial looseness, and torque of suspension arm ball joint. Rear Suspension Assembly.

INSPECTION AFTER INSTALLATION

1.Adjust parking brake operation (stroke). Service and Repair.
2.Check wheel alignment. Rear Suspension Alignment Inspection.
3.Adjust neutral position of steering angle sensor. Special Repair Requirement.