Component Inspection

HEATED SEAT SWITCH INDICATOR

DRIVER SIDE : Component Inspection


1. CHECK HEATED SEAT SWITCH

1.Turn ignition OFF.
2.Disconnect heated seat switch connector.
3.Set the heated seat switch ON.
4.Check continuity between heated seat switch terminals as follows.





*For a digital tester.
NOTE:
- Use a tester that can perform LED (light-emitting diode) measurement.
- The polarity (+ and -) reverses when checking using an analog tester.
Is the inspection result normal?
YES- INSPECTION END
NO- Replace heated seat switch. Removal And Installation.