Navigation

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT : Work Procedure


1. SAVING VEHICLE SPECIFICATION

-CONSULT Configuration
Perform "Before Replace ECU" to save or print current vehicle specification. Navigation.
NOTE:
If "Before Replace ECU" can not be used, use the "Manual Configuration".
- GO TO 2.

2. REPLACE AV CONTROL UNIT

Replace AV control unit. Navigation.
- GO TO 3.

3. WRITING VEHICLE SPECIFICATION

-CONSULT Configuration
Perform "After Replace ECU" or "Manual Configuration" to write vehicle specification. Navigation.
- GO TO 4.

4. OPERATION CHECK

Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
- WORK END