Without Navigation

INSPECTION AND ADJUSTMENT

CONFIGURATION (AV CONTROL UNIT) : Work Procedure


1. WRITE VEHICLE SPECIFICATION

CONSULT Configuration
Write vehicle specification into AV control unit.
To write vehicle specification stored in CONSULT into the AV control unit-GO TO 2.
To write vehicle specification into the AV control unit by hand-GO TO 3.

2. WRITE STORED DATA

CONSULT Configuration
Select "After Replace ECU" in "Read/Write Configuration." Write data stored in CONSULT with the "Before
Replace ECU" function into the AV control unit.
- GO TO 4.

3. MANUALLY WRITE VEHICLE SPECIFICATION

CONSULT Configuration
Perform "Manual Configuration." Refer to the Configuration List to write vehicle specification into the AV control unit. Without Navigation.
- GO TO 4.

4. OPERATION CHECK

Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
- WORK END