Welcome Light Function

INTELLIGENT KEY SYSTEM

WELCOME LIGHT FUNCTION : System Description


CONDITION OF SEARCHING

If all the following conditions are satisfied, BCM searches for Intelligent Key by using outside key antenna (front outside handle LH/RH and back door). BCM has timer to search for 14 days (every 0.3 sec.). If the engine is started, the timer is reset.






OPERATION PROCEDURE

BCM search outside key antenna (front outside handle LH/RH and back door) detection area. If registered
Intelligent Key is detected, BCM turn ON the room lamp and puddle lamp.
For detailed description after turning ON the lamps, refer toSystem Description.

SYSTEM SETTING PROCEDURE

Setting of welcome light function can be changed by the following procedure. (For system setting by CONSULT: Intelligent Key.)
1.Check that Intelligent Key is removed from key slot.
2.Turn ignition switch ON and press and hold request switch (driver side) more than 5 seconds.
3.Confirm that buzzer sounds (combination meter).