Key Reminder Function Does Not Operate

KEY REMINDER FUNCTION DOES NOT OPERATE

Description

NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Work Flow.
- Understand the operation when does it work, refer to {LINK_TO:0000000007520233}, "KEY REMINDER FUNCTION : System
Description".


Diagnosis Procedure


1. CHECK "ANTI KEY LOCK IN FUNCTI" SETTING IN "WORK SUPPORT"

Check "ANTI KEY LOCK IN FUNCTI" setting in "WORK SUPPORT".
Intelligent Key.
Is the inspection result normal?
YES- GO TO 2.
NO- Set "ANTI KEY LOCK IN FUNCTI" setting in "WORK SUPPORT".

2. CHECK DOOR SWITCH

Check door switch.
Door Switch.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK INSIDE KEY ANTENNA

Check inside key antenna.
B2621 (instrument center).
B2623 (luggage room).
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK UNLOCK SENSOR

Check unlock sensor.
Unlock Sensor.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.