Diagnosis Procedure

DOOR LOCK ACTUATOR

PASSENGER SIDE : Diagnosis Procedure


1. CHECK DOOR LOCK ACTUATOR SIGNAL

1.Turn ignition switch OFF.
2.Disconnect front door lock assembly (passenger side).
3.Check voltage between front door lock assembly (passenger side) harness connector and ground.





Is the inspection result normal?
YES- Replace front door lock assembly (passenger side). Removal and Installation.
NO- GO TO 2.

2. CHECK DOOR LOCK ACTUATOR CIRCUIT

1.Disconnect BCM connector.
2.Check continuity between BCM harness connector and front door lock assembly (passenger side) harness connector.





3.Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES- Replace BCM. Removal And Installation.
NO- Repair or replace harness.