Door Mirror Defogger

DOOR MIRROR DEFOGGER

Description

Power is supplied to the door mirror defogger using BCM control.


Component Function Check


1. CHECK DOOR MIRROR DEFOGGER

1.Perform Active Test ("REAR DEFOGGER") using CONSULT.
2.Touch "ON".
3.Check that both side door mirror glasses are getting warmer.
Is the inspection result normal?
YES- Door mirror defogger is OK.
NO- .


Diagnosis Procedure


1. CHECK FUSE

1.Turn ignition switch OFF.
2.Check 10A fuse [No.13, located in fuse block (J/B)].
Is the inspection result normal?
YES- GO TO 2.
NO- Replace the blown fuse after repairing the affected circuit if a fuse is blown.

2. CHECK FUSE BLOCK (J/B)

1.Disconnect fuse block (J/B) connector.
2.Turn ignition switch ON.
3.Check voltage between fuse block (J/B) connector (fuse block side) and ground.





Is the inspection result normal?
YES- GO TO 3.
NO- Replace fuse block (J/B).

3. CHECK INTERMITTENT INCIDENT

Check intermittent incident.
Intermittent Incident.
- INSPECTION END