System Description

AUTOMATIC DRIVE POSITIONER SYSTEM

MANUAL FUNCTION : System Description


OUTLINE

The driving position (seat, steering column and door mirror position) can be adjusted manually with power seat switch, tilt & telescopic switch and door mirror remote control switch.

OPERATION PROCEDURE

1.Turn ignition switch ON.
2.Operate power seat switch, tilt & telescopic switch or door mirror remote control switch.
3.The driver seat, steering column or door mirror operates according to the operation of each switch.

DETAIL FLOW

Seat





Tilt & Telescopic





Door Mirror





NOTE:
The door mirrors can be operated manually when ignition switch is in either ACC or ON position. The ignition switch signal (ACC/ON) is transmitted from BCM to the driver seat control unit via CAN communication and from the driver seat control unit to the automatic drive positioner control unit via UART communication.