Removal And Installation

PERSONAL LAMP

Removal and Installation


CAUTION:
Disconnect the battery negative terminal or remove the fuse.

REMOVAL

1.Remove the headlining assembly. Exploded View.
2.Insert any appropriate tool into the gap between the lens. Remove the lens.





3.Press both side pawls (A) in the direction of the arrow (Left Black Arrow).
Remove the personal lamp finisher.
4.Remove the personal lamp case from the headlining assembly.
NOTE:
Replace the personal lamp case as a set (right and left).

INSTALLATION

Install in the reverse order of removal.
NOTE:
The following item is an easier way to install the personal lamp finisher.





- Press the personal lamp finisher to the headlining. Pull the personal lamp case pawl in the direction of the arrow (Left Black Arrow) with any appropriate tool.