With Distance Control Assist System

ACCELERATOR CONTROL SYSTEM

MODELS WITH DISTANCE CONTROL ASSIST SYSTEM : Removal and Installation


REMOVAL

1.Remove mounting screw, and then remove accelerator pedal assembly.

CAUTION:
- Never disassemble accelerator pedal assembly.
- Never remove accelerator pedal position sensor from accelerator pedal assembly.
- Avoid impact from dropping etc. during handling.
- Be careful to keep accelerator pedal assembly away from water.
2.Disconnect accelerator pedal actuator harness connector and accelerator pedal position sensor harness connector.

INSTALLATION

Installation is the reverse order of removal.