Removal And Installation

CAN GATEWAY

Removal and Installation


CAUTION:
Before replacing CAN gateway, perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Description.

REMOVAL

1.Remove instrument lower panel RH. Exploded View.





2.Remove CAN gateway mounting screw (A).
3.Remove CAN gateway (1) and disconnect the connector.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
To prevent malfunction, be sure to perform "After Replace ECU" of "Read / Write Configuration" or
"Manual Configuration" when replacing CAN gateway. Description.