Description

INSPECTION AND ADJUSTMENT

CONFIGURATION (CAN GATEWAY) : Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing CAN gateway.
Configuration has three functions as follows






CAUTION:
Follow the instructions listed below. Failure to do this may cause malfunctions to the CAN gateway.:
- When replacing CAN gateway, you must perform "Read / Write Configuration" or "Manual Configuration" with CONSULT.
- Complete the procedure of "Read / Write Configuration" or "Manual Configuration" in order.
- If you set incorrect "Read / Write Configuration" or "Manual Configuration", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- Never perform "Read / Write Configuration" or "Manual Configuration" except for new CAN gateway.