7AT RE7R01B

OUTPUT SPEED SENSOR

2WD : Inspection


INSPECTION AFTER REMOVAL






Check foreign materials in oil pan to help determine causes of malfunction. If the ATF is very dark, smells burned, or contains foreign particles, the frictional material (clutches, band) may need replacement. A tacky film that will not wipe clean indicates varnish build up.
Varnish can cause valves, servo, and clutches to stick and can inhibit pump pressure.
-If frictional material is detected, perform A/T fluid cooler cleaning. Cleaning.

INSPECTION AFTER INSTALLATION

- Check A/T fluid leakage. Inspection.
- Check A/T positions after adjusting A/T positions. 7AT RE7R01A.

ADJUSTMENT AFTER INSTALLATION

Adjust A/T positions. 7AT RE7R01A.