Operation CHARM: Car repair manuals for everyone.

Side Support Switch




SIDE SUPPORT SWITCH

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Remove the seat cushion outer finisher (1). Removal and Installation.





2.Remove the screws (A).
3.Remove side support switch (2) from the seat cushion outer finisher.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- Clamp the harness in position.
NOTE:
After installing the driver seat, perform additional service when removing battery negative terminal. Refer to
Description.