Removal And Installation

AIR BREATHER HOSE

AWD : Removal and Installation


REMOVAL

1.Remove propeller shaft assembly (front). Exploded View.
2.Remove air breather hose.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
- Never bend the air breather hose to prevent damage to the hose.
- Insert air breather hose to air breather tube all the way to the curve of the tube.





- Be sure to insert it fully until its end reaches the radius curve end when inserting air breather hose to air breather tube (for


A/T) (1).





- Install air breather hose to air breather tube (for A/T) so that the paint mark is facing upward.


- Securely install the clip to the brackets when installing air breather hose to the bracket.