AWD Warning Lamp Blinks Slowly

AWD WARNING LAMP BLINKS SLOWLY

Description

AWD warning lamp blinks at approximately 2 seconds intervals while driving.


Diagnosis Procedure


1. CHECK TIRE

Check the following.
- Tire pressure
- Wear condition
- Front and rear tire size (There is no difference between front and rear tires.)
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace error-detected parts. And then, drive the vehicle at speed of 20 km/h (12 MPH)
or more for 5 seconds or more. Improper size information is initialized accordingly.

2. CHECK INPUT SIGNAL OF TIRE DIAMETER

With CONSULT
1.Start the engine.
2.Drive at 20 km/h (12 MPH) or more for approximately 4 minutes.
3.Check "DIS-TIRE MONI" of CONSULT "DATA MONITOR" for "ALL MODE AWD/4WD".
Does the item on "DATA MONITOR" indicate "0 - 4 mm"?
YES- INSPECTION END
NO- GO TO 3.

3. TERMINAL INSPECTION

Check AWD control unit harness connector for disconnection.
Is the inspection result normal?
YES- Replace AWD control unit. Exploded View.
NO- Repair or replace the error-detected parts.