Diagnosis Procedure

POWER WINDOW MOTOR

PASSENGER SIDE : Diagnosis Procedure


1. CHECK FRONT POWER WINDOW MOTOR INPUT SIGNAL

1.Turn ignition switch OFF.
2.Disconnect front power window motor (passenger side) connector.
3.Turn ignition switch ON.
4.Check voltage between front power window motor (passenger side) harness connector and ground.





Is the inspection result normal?
YES- GO TO 2.
NO- GO TO 3.

2. CHECK POWER WINDOW MOTOR

Check front power window motor (passenger side).
Component Inspection.
Is the inspection result normal?
YES- GO TO 4.
NO- Replace front power window motor (passenger side). Removal And Installation.

3. CHECK POWER WINDOW MOTOR CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect front power window switch (passenger side) connector.
3.Check continuity between front power window switch (passenger side) harness connector and front power window motor (passenger side) harness connector.





4.Check continuity between front power window switch (passenger side) connector and ground.





Is the inspection result normal?
YES- Replace front power window switch (passenger side). Front Power Window Switch (Passenger Side).
NO- Repair or replace harness.

4. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END