Removal And Installation

AROUND VIEW MONITOR CONTROL UNIT

Removal and Installation


REMOVAL

1.Remove front seat (LH side). Exploded View.
2.Remove floor carpet. Keep a service area.
3.Remove around view monitor control unit mounting screws.
4.Disconnect connector and remove around view monitor control unit.

INSTALLATION

1.Installation is the reverse order of removal.
2.Perform camera image calibration. Refer to{LINK_TO_MANY:0000000007516224}{LINK_TO_MANY:0000000007516225}{LINK_TO_MANY:0000000007516226}{LINK_TO_MANY:0000000007516227}, "CALIBRATING CAMERA IMAGE (AROUND VIEW
MONITOR) : Work Procedure".
3.Perform predictive course line center position adjustment. Work Procedure.

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.