Removal And Installation

BCM (BODY CONTROL MODULE)

Removal and Installation

NOTE:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Description.

REMOVAL

1.Remove dash side finisher (passenger side). Exploded View.
2.Remove bolt and nut.
3.Remove BCM and disconnect the connector.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to perform "WRITE CONFIGURATION" when replacing BCM. Or not doing so, BCM control function does not operate normally.
NOTE:
Be sure to perform the system initialization (NATS) when replacing BCM. Work Procedure.