Diagnosis Procedure

TOUCH SENSOR

RH : Diagnosis Procedure


1. CHECK TOUCH SENSOR INPUT SIGNAL

1.Turn ignition switch OFF.
2.Check voltage between touch sensor RH harness connector and automatic back door control unit harness connector.





Is the inspection result normal?
YES- GO TO 3.
NO- GO TO 2.

2. CHECK TOUCH SENSOR RH CIRCUIT

1.Disconnect automatic back door control unit and touch sensor RH connector.
2.Check continuity between automatic back door control unit harness connector and touch sensor RH harness connector.





3.Check continuity between automatic back door control unit harness connector and ground.





Is the inspection result normal?
YES- Replace automatic back door control unit. Service and Repair.
NO- Repair or replace harness.

3. CHECK TOUCH SENSOR RH GROUND CIRCUIT

1.Disconnect automatic back door control unit and touch sensor RH connector.
2.Check continuity between automatic back door control unit harness connector and touch sensor RH harness connector.





3.Check continuity between automatic back door control unit harness connector and ground.





Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace harness.

4. CHECK TOUCH SENSOR RH GROUND CIRCUIT 2

1.Connect automatic back door control unit and touch sensor RH connector.
2.Check voltage between automatic back door control unit harness connector and ground.





Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace harness.

5. CHECK TOUCH SENSOR RH

Component Inspection.
Is the inspection result normal?
YES- GO TO 6.
NO- Replace touch sensor RH.

6. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END