Automatic Back Door Anti-Pinch Function Does Not Operate

AUTOMATIC BACK DOOR ANTI-PINCH FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK POWER SUPPLY AND GROUND CIRCUIT

Check automatic back door control unit power supply and ground circuit.
Power Supply And Ground Circuit.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK TOUCH SENSOR

Check touch sensor.
Component Function Check.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. REPLACE AUTOMATIC BACK DOOR CONTROL UNIT

1.Replace automatic back door control unit. Power Supply And Ground Circuit.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.