Component Function Check

ROOM LAMP REQUEST SIGNAL CIRCUIT

Component Function Check


1. CHECK ROOM LAMP TIMER SETTING

CONSULT WORK SUPPORT
1.Select "SET I/L D-UNLCK INTCON" of BCM (INT LAMP) work support item.
2.Check the setting status.





Is the setting "On"?
YES- GO TO 2.
NO- Change the setting to "On"

2. CHECK ROOM LAMP TIMER SIGNAL BY CONSULT

CONSULT DATA MONITOR
1.Turn ignition switch OFF.
2.Select "ROOM LAMP REQ" of TOTAL ILLUM C/U data monitor item.
3.While operating the door lock/door unlock, check the monitor status.





Is the item status normal?
YES- Room lamp timer signal circuit is normal.
NO- Diagnosis Procedure.