Seat Belt Warning Lamp Does Not Turn On

SEAT BELT WARNING LAMP DOES NOT TURN ON

Diagnosis Procedure


1. CHECK SELF DIAGNOSIS RESULT

Perform "COMBINATION METER" self diagnostic result. CONSULT Function
Is DTC detected?
YES- Repair or replace the malfunctioning parts.
NO- GO TO 2.

2. CHECK POWER SUPPLY

Check fuse are not blown.
Check ignition power supply of combination meter. Combination Meter
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK SEAT BELT BUCKLE SWITCH CIRCUIT (DRIVER SIDE)

Check seat belt buckle switch circuit (driver side). Component Function Check
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. .CHECK SEAT BELT BUCKLE SWITCH CIRCUIT (PASSENGER SIDE)

Check seat belt buckle switch circuit (passenger side). Component Function Check
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK SEAT BELT WARNING LAMP CIRCUIT

Check ground circuit. Seat Belt Warning Lamp Circuit
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CONFIRM THE OPERATION

Confirm the operation again.
Is the inspection result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.