Removal And Installation

STARTER MOTOR

VQ35HR : Removal and Installation (2WD)


Removal

1.Disconnect the battery cable from the negative terminal.
2.Remove engine undercover using power tools.





3.Remove "B" terminal nut (1).





4.Disconnect "S" connector (1).
5.Remove starter motor mounting bolts (A) and harness bracket (2), using power tools.





6.Remove compressor bracket bolts (A).
7.Remove compressor bracket (1).





8.Remove A/T fluid cooler tube clip bolts and bracket. Fluid Cooler System.





9.Move A/T fluid cooler tube (1) downward.
10.Remove starter motor (2) forward from the vehicle.






INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to tighten "B" terminal nut carefully.