Removal and Installation

FRONT FENDER

Removal and Installation


CAUTION:
Use protective tape or shop cloth to protect from damage during removal and installation.

REMOVAL

1.Remove clips of hood seal assembly (side) on font fender.
2.Remove fillet molding. Removal And Installation.
3.Remove fender protector. Removal And Installation.
4.Remove front bumper fascia. Removal And Installation.
5.Remove center mud guard. .
6.Remove front combination lamp. Removal And Installation.
7.Remove front fender cover.
8.Remove mounting bolts and remove front fender.

CAUTION:
A viscous urethane foam is installed on the back surface of front fender. When removing the front fender, be careful to not deform the front fender while performing the procedure and removing the viscous urethane foam a little at a time.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- After installation, apply the touch-up paint (the body color) onto the head of front fender mounting bolts.
- After installation, adjust the following part.
- Hood assembly: Adjustments.
- Front door: Adjustments.
- Front combination lamp: Aiming Adjustment Procedure.
- Perform camera image calibration. Work Procedure.