Blind Spot Intervention System

SYSTEM

BLIND SPOT INTERVENTION SYSTEM : Fail-safe (Lane Camera Unit)


FAIL-SAFE CONTROL BY DTC

If a malfunction occurs in the lane camera unit, ADAS control unit cancels control, sounds a beep, and turns
ON the Blind Spot Warning/Blind Spot Intervention warning in the combination meter.

TEMPORARY DISABLED STATUS AT HIGH TEMPERATURE

- If the vehicle is parked in direct sunlight under high temperature conditions, the system may be deactivated automatically. And the buzzer sounds and Blind Spot Warning/Blind Spot Intervention warning lamp (yellow)
in the combination meter will blinks.
- When interior temperature is reduced, the system will resume when dynamic driver assistance switch is turned OFF and turned ON and the Blind Spot Warning/Blind Spot Intervention warning lamp (yellow) in the combination meter will stop blinking.