Ground Circuit

GROUND CIRCUIT

Component Function Check


1. CHECK FUNCTION

1.Select "AUTOMATIC BACK DOOR CONTROL UNIT" using CONSULT.
2.Select "DESTINATION" and "HAZARD" in "DATA MONITOR" mode.
3.Check that the function operates normally according to the following conditions.





Is the inspection result normal?
YES- Automatic back door ground circuit is OK.
NO- .


Diagnosis Procedure


1. CHECK GROUND CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect automatic back door control module connector.
3.Check continuity between automatic back door control module harness connector and ground.





Is the inspection result normal?
YES- Replace automatic back door control module. Automatic Back Door Control Module.
NO- Repair or replace harness.