Diagnosis Procedure

AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE

CLOSURE FUNCTION : Diagnosis Procedure


1. CHECK HALF LATCH SWITCH

Check half latch switch.
Half Latch Switch.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK BACK DOOR CLOSURE MOTOR

Check back door closure motor.
Back Door Closure Motor.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. REPLACE AUTOMATIC BACK DOOR CONTROL MODULE

1.Replace automatic back door control module. Automatic Back Door Control Module.
2.Confirm the operation after replacement.
Is the result normal?
YES- INSPECTION END
NO- Check intermittent incident. Intermittent Incident.