Removal And Installation

FRONT FENDER

FRONT FENDER : Removal and Installation


CAUTION:
Use a shop cloth to protect the body from being damaged during removal and installation.

REMOVAL

1.Remove side step. Removal And Installation.
2.Remove front over fender. .
3.Remove front combination lamp. Removal And Installation.
4.Remove front fender drip cover.
5.Remove front fender cover. Exploded View.
6.Remove front fender protector. Removal And Installation.
7.Remove mounting bolts and remove front fender.

CAUTION:
An viscous urethane foam is installed on the back surface of front fender. When removing the front fender, be careful to not deform the front fender while performing the procedure and removing the viscous urethane foam a little at a time.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- After installation, apply the touch-up paint (the body color) onto the head of front fender mounting bolts.
- After installation, adjust the following part.
- Hood assembly: Adjustments.
- Front door: Adjustments.