Removal And Installation

FRONT DOOR LOCK

DOOR LOCK : Removal and Installation


REMOVAL

1.Remove outside handle and outside handle bracket. Service and Repair.
2.Remove door lock assembly TORX bolts.
3.Disconnect door lock actuator connector, and then remove door lock assembly.
4.Remove key rod from door lock assembly.

INSTALLATION

Note the following items, and then install in the reverse order of removal.

CAUTION:
- Check door lock cables are properly engaged with inside handle and outside handle.
- When installing key rod, rotate key rod holder until a click is felt.
- After installation, check door open/close, lock/unlock operation.