Keyless System - Door Lock Request Inop/No Start

Classification: EL12-047

Reference: ITB12-043

Date: July 31, 2012

2012 QX56;
DOOR REQUEST SWITCH INOPERABLE AND NO START AT PDI

APPLIED VEHICLES: 2012 QX56 (Z62)





APPLIED VINS & DATES

IF YOU CONFIRM

During pre-delivery inspection (PDI), one of the two vehicle Intelligent Keys behaves in the following manner:

^ Doors will lock/unlock when the lock/unlock button on the Intelligent Key is pushed

^ Doors will not lock/unlock when the door request switch is pushed

^ Vehicle will not start unless the Intelligent Key is held near the ignition start button

ACTION

Reprogram both Intelligent Keys. Do not replace the Intelligent Key.

a) Confirm the Immobilizer Card is inserted into the CONSULT PC.

b) Connect the CONSULT-III plus VI to the vehicle, then push the vehicle power switch once to ON mode.

c) Start CONSULT-III plus, then select Immobilizer and follow the onscreen procedure.

NOTE:
Make sure your ASIST has been freshly synchronized and all CONSULT-III plus upgrades have been installed before starting the reprogramming 2012 QX56 (Z62)





CLAIMS INFORMATION