Sunroof / Moonroof: Adjustments

GLASS LID

Adjustment











Glass lid Adjustment and Surface Mismatch Adjustment
1.Remove side trims.
2.After loosening glass lid from TORX bolts (left and right).
3.Adjust glass lid from outside of vehicle so it resembles "A - A","B - B""C - C".









4.To prevent glass lid from moving after adjustment, first tighten the TORX bolts of front left, and then tighten the TORX bolts of rear right.
5.Tighten remaining TORX bolts, being careful to prevent glass lid from moving.
6.Tilt glass lid up and down several times to check that it moves smoothly.
NOTE:
After adjustment the sunroof unit assembly, perform additional service. Description.