Removal And Installation

SECOND SEAT

Removal and Installation


REMOVAL


CAUTION:
- When removing and installing, use shop cloths to protect parts from damage.
- When removing and installing, 2 workers are required so as to prevent it from dropping.
1.Remove the headrest.
2.Remove the seat hinge cover.





a.Bench seat (RH side) and captain seat
- Open pawls on upper side to outside and disconnect the pawls.
- Pull the cover forward, side the pawl on lower side downward, and disconnect the pawl.










b.Bench seat (LH side)
- Open pawls on upper side to outside and disconnect the pawls.
- Pull the cover forward, side the pawl on lower side downward, and disconnect the pawl.





3.Remove the from mounting bolt of seat hinge assembly.
4.Operate rear seat lever or reclining lever to release seat lock assembly lock and to fold seat forward.





5.Disconnect seat harness assembly harness connector (A).
6.Remove the rear mounting nut of seat hinge assembly.
7.Remove seat from the vehicle.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

INSTALLATION

Install in the reverse order of removal.