Removal And Installation

THIRD SEAT

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Remove the headrest.
2.Remove the leg cover.





1.Pull up the front edge of the leg cover to release the pawls.
2.Slide the leg cover forward to release the pawls.





3.Remove the mounting bolts on the front side of the third seat.
4.Operate fold down switch or reclining switch, and fold down seatback LH and RH.
5.Remove the luggage floor bracket.
1.Remove the luggage floor rear board. Luggage Floor Rear Board.
2.Remove the mounting nuts and screws of the luggage floor bracket.
6.Disconnect harness connector (A) and remove harness clip (B) of seat harness assembly.





7.Remove the seat belt anchor plate.
8.Remove the mounting nuts on the rear side of the third seat.
9.Remove the third seat assembly from vehicle.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

INSTALLATION

Install in the reverse order of removal.