Information Display (ASCD)

INFORMATION DISPLAY (ASCD)

Component Function Check


1. CHECK INFORMATION DISPLAY

1.Start engine.
2.Press MAIN switch on ASCD steering switch.
3.Drive the vehicle at more than 40 km/h (25 MPH).

CAUTION:
Always drive vehicle at a safe speed.
4.Press SET/COAST switch.
5.Check that the reading of the speedometer shows the same value as the set speed indicated in the information display while driving the vehicle on a flat road.
Is the inspection result normal?
YES- INSPECTION END
NO- Go to .


Diagnosis Procedure


1. CHECK DTC

Check that DTC UXXXX or P0500 is not displayed.
Is the inspection result normal?
YES- GO TO 2.
NO-1- Perform trouble diagnosis for DTC UXXXX.
NO-2- Perform trouble diagnosis for DTC P0500. For USA And Canada.

2. CHECK DTC WITH "COMBINATION METER"

Combination Meter.
Is the inspection result normal?
YES- GO TO 3.
NO- Perform trouble diagnosis for DTC indicated.

3. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
Is the inspection result normal?
YES- Replace combination meter.
NO- Repair or replace.