Removal and Installation

COOLING FAN

Removal and Installation


REMOVAL

1.Remove front under cover with power tool. Exploded View.
2.Remove fan shroud (lower). Exploded View.
3.Move reservoir tank to the position without the hindrance for work, refer to following.
- Remove fixed bolts
- Remove reservoir tank hose clamp.
4.Remove radiator core support cover. Exploded View.
5.Remove fan shroud (upper), refer to following.
- Remove EVAP hose.
- Remove fan shroud (upper) mounting bolts. Exploded View.
- Move air cleaner to the position without the hindrance for work.
- Remove engine cover. Exploded View.
6.Remove cooling fan.
7.Remove drive belt. Exploded View.
8.Disconnect fan coupling harness connector.
9.Remove fan coupling.
10.Remove bracket.
11.Remove cooling fan pulley.
12.Remove Idler pulley.
13.Remove the fan bracket, refer to following.
- Disconnect A/C compressor harness connector. Exploded View.
- Remove A/C compressor mounting bolt. Exploded View.
- Remove fan bracket mounting bolt.

INSTALLATION

Installation is in the reverse order of removal.