Piston

HOW TO SELECT PISTON AND BEARING

Piston


WHEN NEW CYLINDER BLOCK IS USED






Check the cylinder bore grade on the bottom face of the cylinder block, and select the piston of the same grade.
NOTE:
Piston is available with piston pin as a set for the service part.

WHEN CYLINDER BLOCK IS REUSED

1.Measure the cylinder bore inner diameter. [1][2]Specifications.





2.Determine the bore grade by comparing the measurement with the values under the cylinder bore inner diameter of the "PISTON SELECTION TABLE".





3.Select piston of the same grade.

PISTON SELECTION TABLE

Unit: mm (in)





NOTE:
Piston is available together with piston pin as assembly.