Removal And Installation

PUDDLE LAMP

Removal and Installation


CAUTION:
- Disconnect the battery cable from negative terminal or remove the fuse.
- Never touch puddle lamp directly by hand. Keep grease and other oily substances away from it.
- Never touch puddle lamp by hand while it is lit or right after it is off.
- It is prohibited to disassemble puddle lamp.
- Always replace puddle lamp as an assembly, when replacing.

REMOVAL

1.Remove door mirror assembly. Removal And Installation.
2.Disconnect puddle lamp harness connector terminal from door mirror harness connector.





3.Disengage base cover fixing pawls using a small flat-bladed screwdriver (A), and then remove base cover.

CAUTION:
- Apply protective tape (B) around the base to protect the surface from damage.
- Apply protective tape to small flat-bladed screwdriver.










4.Disengage puddle lamp fixing pawls, and then remove puddle lamp (1) from base cover (2).






INSTALLATION

Install in the reverse order of removal.