Removal And Installation

FOOT LAMP

REAR FOOT LAMP : Removal and Installation


CAUTION:
- Disconnect the battery cable from negative terminal or remove the fuse.
- Never touch rear foot lamp assembly directly by hand. Keep grease and other oily substances away from it.
- Never touch rear foot lamp assembly by hand while it is lit or right after it is off.

REMOVAL

1.Remove seat cushion front finisher. Removal and Installation.
2.Release seatback lower carpet band from the back of seat cushion frame.
3.Pull seatback lower carpet toward vehicle rear from underside.





4.Disengage rear foot lamp assembly fixing pawls using a small flat-bladed screwdriver (A) as shown by the arrow in the figure.





5.Remove rear foot lamp assembly from seatback lower carpet.

INSTALLATION

Note the following items, and install in the reverse order of removal.

CAUTION:
- Rear foot lamp cannot be disassembled.
- Always replace rear foot lamp as an assembly, when replacing.