Transmission Mode Switch: Service and Repair

TOW MODE SWITCH

Removal and Installation

NOTE:
Tow mode switch is integrated in to SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or
4WD switch assembly (4WD models).

REMOVAL

1.Remove console finisher assembly from center console assembly. Removal And Installation.
2.Disconnect SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or 4WD switch assembly (4WD models) harness connector.
3.Press SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or 4WD switch assembly (4WD models) fixing pawls, and remove SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD
models) or 4WD switch assembly (4WD models) from console finisher assembly.

INSTALLATION

Install in the reverse order of removal.