Scan Tool Testing and Procedures

DIAGNOSIS SYSTEM (PRE-CRASH SEAT BELT)

CONSULT Function

Diagnosis for pre-crash seat belt system can be performed using CONSULT.

APPLICATION ITEM







SELF-DIAGNOSIS RESULTS

Testing and Inspection.

CAUTION:
When malfunctions are detected in several systems, including CAN communication [U1000], troubleshoot CAN communication [U1000].
A malfunction of system may be displayed when battery voltage is low (when 7 to 8 V is continued for approximately 2 seconds) even though the system is not malfunctioning. Erase DTC memory and never replace any parts after making sure that the system is normal, especially if the malfunctions are displayed after replacing battery.

ERASING SELF-DIAGNOSIS RESULTS

- SELF-DIAGNOSIS RESULTS
Current "SELF-DIAG RESULTS" are displayed. (If all suspect circuits have been repaired, "NO DTC" is displayed.)

DATA MONITOR







WORK SUPPORT