Removal And Installation

AIR BREATHER HOSE

2WD : Removal and Installation


REMOVAL






1.Remove heat plate (1).
2.Remove A/T air breather hose assembly from bracket and clip.
3.Pull out A/T air breather hose assembly from air breather tube.
4.Remove air breather cap from A/T air breather hose.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
- Never bend the A/T air breather hose to prevent damage to the hose.
- Insert A/T air breather hose to air breather tube all the way to the curve of the tube.





- To install air breather cap (1), face the arrow "" (A) toward the right side of the vehicle as shown in the figure.





- To fix A/T air breather hose (1) to the clip (2), face the A/T air breather hose paint mark (A) upward and observe the installation position shown in the figure.





- Insert A/T air breather hose (1) to air breather tube (2) so that the paint mark (A) is facing upward.