Rear LH

AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATE NORMALLY

REAR LH : Diagnosis Procedure


1. PERFORM INITIALIZATION PROCEDURE

Initialization procedure is performed and operation is confirmed.
Refer toWork Procedure
Is the inspection result normal?
YES- INSPECTION END
NO- GO TO 2.

2. CHECK ENCODER (REAR LH) CIRCUIT

Check encoder (rear LH) circuit.
Component Function Check.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.