LDP ECM CAN Cir2
U0100 LDP) ECM CAN CIR2
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1. DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT.
- GO TO 2.
2. DTC CONFIRMATION
1.Turn ignition switch ON and wait for 2 seconds or more.
2.Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT.
Is the DTC "U0100" detected?
YES- Refer to "Diagnosis Procedure" .
NO- Refer to "Intermittent Incident" Intermittent Incident.
Diagnosis Procedure
1. PERFORM SELF-DIAGNOSIS OF ECM
Perform self-diagnosis of ECM with CONSULT.
Is any DTC detected?
YES- GO TO 2.
NO- GO TO 4.
2. ECM TROUBLE DIAGNOSIS
Perform trouble diagnosis of ECM. Refer to "DTC Index" Testing and Inspection.
- GO TO 3.
3. ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT.
Is the DTC "U0100" erased?
YES- INSPECTION END
NO- Replace ABS actuator and electric unit (control unit).
4. PROVISIONAL REPLACEMENT OF ECM
Remove ECM. Install a normal ECM.
- GO TO 5.
5. ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT.
Is the DTC "U0100" erased?
YES- Replace ECM.
NO- Replace ABS actuator and electric unit (control unit).